제품 분류 영상용 (ShotGun) Mic. 방송용 Microphone
Tube Microphone Condenser Microphone
Accessories Stereo Microphone


 ::: Stereo Microphone 제품 리스트
1. NT4
 2. NT5


■ NT4

▷ Stereo Microphone
참신한 디자인의 X-Y스테레오 콘덴서 마이크. 배터리 구동도 가능하며 1개의 마이크로 스테레오 채널의 녹음이 가능한 제품입니다.
실제의 레코딩에서도 강렬한 스테레오 이미지를 재현.
인기를 끌었던 NT3를 퀄리티를 계승해 제작된 마이크 입니다.

 

 

  • Stereo XY Condenser Microphone
  • 2 X Externally biased 1/2" Capsules with gold sputtered diaphragm
  • Capsules closely matched with full frequency response
  • Phantom power or 9V battery operation
  • Durable satin-nickel finish
  • Custom stereo cables (included) dual XLR and mini stereo jack
  • Custom WS4 twin-head Wind Shield
  • Surface-mount transformerless circuitry
  • Complete with Custom Carry Case and RM3 Stand Mount
 

  • Capsule: 2 X 0.5" (13mm) externally polarised condenser microphone in stereo XY placement
  • Active Electronics: J-FET impedance converter with bipolar output buffer
  • Pickup Pattern: Cardioid per capsule
  • Frequency response: 20 Hz-20 kHz
  • Output Impedance: 200 Ohms
  • Sensitivity: -38 dB re 1v/Pa (12mV @ 94dB SPL) +/- 2dB
  • Equivalent Noise: <16 dB SPL ("A"-weighted per IEC268-15)
  • Maximum Output: +13.9 dBu (@ 1% THD into 1K ohm)
  • Dynamic Range: > 128 dB (per ICE651, IEC268-15)
  • Maximum SPL: 143 dB (@1%THD into 1K Ohm)
  • Signal/Noise Ratio: 78 dB (1kHz rel 1 Pa; per ICE651, IEC268-15)
  • Power Requirements: P48, P24, P12 phantom power or 9V battery
  • Pacled Weight: 2.3kg (Mic only 480g)
  • Mic Dimensions: Diameter: 32mm Length: 232mm
  • Packed Dimensions: 310 x 400 x 110mm
■ NT5

▷ Stereo Microphone (Pair)
스테레오 매치 페어 콘덴서 마이크의 결정판!
마이크의 소리의 격차를 최대한 막은 고퀄리티의 스테레오 마이크.
뛰어난 외관의 2개의 콘덴서 마이크가 드럼의 오버헤드나 악기의 녹음은 물론 보컬에도 그 뛰어난 성능을 발휘합니다.

 

 

  • True condenser transducer
  • Gold sputtered 1/2" Capsules
  • Heavy duty satin-nickel-plated body
  • Low Noise
  • Full Frequency Response
  • Custom WS5 Wind Shield
  • Custom RM5 Stand Mount
  • Surface-mount transformerless circuitry
  • Supplied as a MATCHED PAIR in a Custom Carry Case
 

  • Capsule: Externally polarised 0.5" (13mm) condenser transducer
  • Active Electronics: J-FET impedance converter with bipolar output buffer
  • Pickup Pattern: Cardioid
  • Frequency response: 20 Hz-20 kHz
  • Output Impedance: 200 Ohms
  • Sensitivity: -38 dB re 1v/Pa (12mV @ 94dB SPL) +/- 2dB
  • Equivalent Noise: <16 dB SPL ("A"-weighted per IEC268-15)
  • Maximum Output: +13.9 dBu (@ 1% THD into 1K ohm)
  • Dynamic Range: > 128 dB (per ICE651, IEC268-15)
  • Maximum SPL: 143 dB (@1%THD into 1K Ohm)
  • Power Requirements: P48, P24 phantom power
  • Pacled Weight: 1.8 kg (Mic only100g)
  • Mic Dimensions: Diameter: 20mm Length: 118mm
  • Packed Dimensions: 310 x 400 x 110mm